Punching Holes & Riveting

Metal pressure rollerTool for professional use. This roller is particularly suitable for pressing on adhesive seams,as the seam can be easily followed due to the one-sided mounting of the roller.Product features:- Ball bearings on one side.- Heavy steel design.- With sturdy wooden handle.- Roller width: approx. 50 mm.- Castor diameter: approx. 48 mm.- Length: approx. 190 mm.- Weight: approx. 760 g.

Rubber pressure roller. 4.5 cm wide.Perfect for pressing on glued seams.(The color of the handle may differ from the picture).

A hammer for fastening press studs, rivets and eyelets- Sturdy fiberglass handle- The head is made of light gray hard rubber and leaves no abrasion on light-colored textiles- The large surface area of the hammer head enables an even distribution of force.

The supplementary set for the Vario pliers.Pliers inserts for punching holes and with two replacement plastic inletsFor holes with a diameter of 3, 4 and 8 mm.

The revolver hole punch punches holes of various sizes:Hole sizes: 2.5 mm, 3.0 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm

The practical basic assortment for attaching eyelets and rivets.The following parts are included:1 Vario pliers10 press studs Anorak 15 mm, silver-colored,10 press studs Anorak 15 mm, burnished,10 press studs Sport & Camping 15 mm, silver-colored,10 press studs Jersey 10 mm, silver-colored,25 eyelets 4 mm, silver-colored,25 eyelets 4 mm, gold-coloredOf course, instructions for processing are also included. The individual parts can easily be bought again in refill packs.

The tripod is a practical tool for attaching press studs and eyelets.This also works far away from the edge of the fabric.The tripod works with all no-sew buttons and eyelets, with the exception of color snaps and 11 mm and 14 mm eyelets.

Versatile pliers for punching holes and riveting.This enables the sewing-free products to be processed perfectly.The processing tools are included in the packaging of the suitable eyelets and press studs.