Adhesive for rubber sheeting < 0,60 mm
€7.00
Available, delivery time: 1-2 weeks
Product information "Adhesive for rubber sheeting < 0,60 mm"
| Application
Clean the surfaces to be bonded with our latex cleaner and apply the latex adhesive to both sides of the surfaces to be bonded. Now allow them to flash off. The seams can only be pressed together once the adhesive layer appears transparent throughout. Round objects are particularly suitable for rolling over.
The stability is now already sufficient for the first fittings. The adhesive is fully cured after 48 hours.
We will be happy to send you latex remnants for adhesive tests or repairs. Please let us know the desired colors and thicknesses.
For precise application of the glue, we offer a spout for the 100 ml glue bottle below.
Kleben
Thinner for the rubber solution Art. no. 49005.SHIPPING ONLY WITHIN GERMANY!Attention: For safety reasons we are not allowed to ship the thinner outside of Germany. In Germany, a maximum of 4 x 1 liter per package may be shipped. If larger quantities are ordered, we will have to charge an additional shipping fee.We will gladly send you latex residues for adhesive tests or repairs. Please let us know the desired colors and thicknesses.
Content: 100 ml (€120.00 / 1000 ml)
This latex adhesive is a white ammonia-based latex milk. We use it for thin and medium latex thicknesses up to 0.60 mm. For thicker latex we recommend the rubber solution art. no. 49005.| ApplicationClean the surfaces to be bonded with our latex cleaner and apply the latex adhesive to both sides of the surfaces to be bonded. Now allow them to flash off. The seams can only be pressed together once the adhesive layer appears transparent throughout. Round objects are particularly suitable for rolling over.The stability is now already sufficient for the first fittings. The adhesive is fully cured after 48 hours.We will be happy to send you latex remnants for adhesive tests or repairs. Please let us know the desired colors and thicknesses.For precise application of the glue, we offer a spout for the 100 ml glue bottle below.
Latex surfaces to be bonded must be very clean. Use a lint-free cloth and our cleaner.SHIPPING ONLY WITHIN GERMANY!Attention: For safety reasons, we are not allowed to ship the cleaner outside of Germany. In Germany, a maximum of 4 x 1 liter per package may be shipped. If larger quantities are ordered, we have to charge an additional shipping fee. Important: No shipping to packing stations!We will be happy to send you latex residues for adhesive tests or repairs. Please let us know the desired colors and thicknesses.
Thinner for the rubber solution Art. no. 49005.SHIPPING ONLY WITHIN GERMANY!Attention: For safety reasons we are not allowed to ship the thinner outside of Germany. In Germany, a maximum of 4 x 1 liter per package may be shipped. If larger quantities are ordered, we will have to charge an additional shipping fee.We will gladly send you latex residues for adhesive tests or repairs. Please let us know the desired colors and thicknesses.
Contents: 100 ml, glue for thick latex > 0.60 mm This adhesive is particularly suitable for thick latex above 0.60 mm. We glue the thinner foils together with our latex glue.| Application Clean the surfaces to be bonded with our latex cleaner. The rubber solution is a contact adhesive and must therefore be applied to both sides of the surfaces to be bonded. A fine brush is ideal for this. The applied adhesive layer needs about 10 minutes to dry off and can then be pressed together. The stability is already sufficient for the first fittings. The adhesive point is completely hardened after 48 hours. DELIVERY ONLY WITHIN GERMANY !Attention: For safety reasons we are not allowed to ship the glue outside of Germany. In Germany, a maximum of 4 x 1 liters can be sent per package. If larger quantities are ordered, we have to charge additional shipping.Important: No shipping to packing stations!
Content: 100 ml (€120.00 / 1000 ml)
This latex adhesive is a white ammonia-based latex milk. We use it for thin and medium latex thicknesses up to 0.60 mm. For thicker latex we recommend the rubber solution art. no. 49005.| ApplicationClean the surfaces to be bonded with our latex cleaner and apply the latex adhesive to both sides of the surfaces to be bonded. Now allow them to flash off. The seams can only be pressed together once the adhesive layer appears transparent throughout. Round objects are particularly suitable for rolling over.The stability is now already sufficient for the first fittings. The adhesive is fully cured after 48 hours.We will be happy to send you latex remnants for adhesive tests or repairs. Please let us know the desired colors and thicknesses.For precise application of the glue, we offer a spout for the 100 ml glue bottle below.
Content: 250 ml (€44.00 / 1000 ml)
Latex surfaces to be bonded must be very clean. Use a lint-free cloth and our cleaner.SHIPPING ONLY WITHIN GERMANY!Attention: For safety reasons, we are not allowed to ship the cleaner outside of Germany. In Germany, a maximum of 4 x 1 liter per package may be shipped. If larger quantities are ordered, we have to charge an additional shipping fee. Important: No shipping to packing stations!We will be happy to send you latex residues for adhesive tests or repairs. Please let us know the desired colors and thicknesses.
Content: 100 ml (€80.00 / 1000 ml)
This adhesive is for latex thicker than 0,60 mm. For thinner material please use our adhesive 49004.SHIPMENT ONLY WITHIN GERMANY!Important: Due to air cargo security regulations we are not allowed to ship this item outside of Germany. In Germany a maximum of 4 Liters can be send by mail in one package. For orders with larger quantities, we will charge another shipment. Important: No shipping to packing stations!We are happy to send you latex remnants for adhesion tests or repairs. Please let us know what Colors and Strengths you need.